TRIGGER ELECTRONICS

TRIGGER-FET   $16

A MOSFET is essentially an electrically controlled switch. When using high power batteries such as LiPo batteries in your AEG, the electrical current going through your trigger contacts is much higher than with regular batteries. Trigger contacts were not designed to handle this kind of current and are likely to burn out/fail on their own. With a MOSFET, the trigger contacts are used only to send a small current electrical signal to the MOSFET switch, where the large current draw from the motor is handled with ease internally. More advanced MOSFETs may have additional features.

Features:

• Basic AEG MOSFET trigger contact protection
• 5kW TVS Diode: Voltage spike protection
• Dimensions: 0.6" x 0.4" x 0.2" (15mm x 11mm x 6mm)
• Rated for use up to 14.8V batteries
• 16 awg black wire to negative battery (10") and motor (18")
• 16 awg red wire (28") positive battery to motor
• 16 awg wire is high-strength nylon-coated (2.6mm OD)
• 22 awg signal wire (16") + additional 16" signal wire for 4-wire install
• 2x motor connectors, 2x fuse connectors, 30 amp fuse, and installation guide also included
• Shipped in anti-static protective bag