TRIGGER ELECTRONICS

BURST-FET   $32

The BURST-FET is Trigger Electronics' advanced, multi-feature MOSFET design that provides all the advanced features one would want in an airsoft fire control unit, in a simple and easy to use package. No large/expensive programmer card, no software, no complex programming routines: the unit itself does it all.

Features:

• 10 milliseconds to 2.0 seconds manually adjustable burst timer (~1 to 60 shot adjustable burst)
• ON/OFF active brake mode
• ON/OFF burst mode or regular fire selection (semi/auto)
• Semi -> Burst
• Auto -> Tap for burst, hold for full auto
• Full MOSFET trigger protection
• All settings are adjusted on the board itself, nothing else needed
• Rated for use up to 14.8V batteries
• 1.37" x 0.87" x 0.31" (35 x 22 x 8mm) dimensions
• 10" 16 awg wire to battery, 18" 16 awg wire to motor, 16" 22 awg wire to trigger contacts (2x)
• Includes all necessary high-strength nylon-coated wire (2.6mm OD), 2x motor connectors, 2x fuse connectors, 30 amp fuse, and installation guide
• Shipped in anti-static protective bag

BURST-FET Drop In Unit V2/V3 $42

Want a BURST-FET but don't want to do any soldering? This drop in unit is for you! Each drop-in unit is made to order using:

• V2/V3 SHS Trigger Contacts
• Gold Plated Motor Connectors
• Male Deans Style T-Connectors
• Custom length wiring - message desired lengths on eBay within 24 hours after purchase! Send:
  • Gearbox Version Type (V2 or V3)
  • BURST-FET to Battery Length
  • MOTOR to BURST-FET Length
  • Trigger Contacts to BURST-FET Length
  • Front or Rear Wired
• Includes 30 Amp fuse unless requested to be removed (we do not recommend using BURST-FET without a fuse)
• Please allow 2 days of manufacturing time for custom orders

COPYRIGHT © 2020 TRIGGER ELECTRONICS