ACTIVE BRAKE | Trigger Electronics

ACTIVE BRAKE MOSFET $23

Active braking is a commonly desired feature in airsoft MOSFET systems. Active braking uses the voltage generated from the motor while spinning to reverse the polarity upon trigger release, causing the motor to stop instantaneously. Active braking makes the gun feel more realistic when firing and ensures that the gears make exactly one complete cycle on semi auto, and overspin is eliminated. Without overspin, the gears will stop in the correct spot every time and thus gearbox strain is heavily reduced. Active braking slightly speeds up the wear on the motor brushes. Never use active braking without the anti-reversal latch installed.

Features:

Active Braking
ON/OFF Switch for Active Brake
Full MOSFET Trigger Protection in ON and OFF modes
Rated for use up to 14.8 V Battery
0.9" x 0.55" x 0.28" (23 x 14 x 7 mm) dimensions
10" 16 awg wire to battery, 18" 16 awg wire to motor, 16" 22 awg signal wires (2x)
Includes all necessary high-strength nylon-coated wire (2.6mm OD), 2x motor connectors, 2x fuse connectors, 30 amp fuse, and installation guide
Shipped in anti-static protective bag

Shop on eBay

TRIGGER ELECTRONICS

ACTIVE BRAKE MOSFET $23

Additional Resources